TC7106ARCPL
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Voltage - Supply | 9V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7106A |
| Pin Count | 40 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Operating Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Converter Type | ADC, DUAL-SLOPE |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LCD |
| Output Format | PARALLEL |
| Negative Supply Voltage-Nom | -4.5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7106ARCPL Overview
Tube-like packaging has been used here.Display drivers is included in the package of version 40-DIP (0.600, 15.24mm), so you can install Display drivers from there.Its display type is LCD.In order to mount this electronic component on the board, Through Hole is used.During normal use, this electrical part has an operating temperature of 0°C~70°C.I believe that it will work with a 9VV power source.An impedance-matching device is used to terminate transmission lines using a 40 termination.TC7106A devices are among the devices in this family.The entire device is made up of 40 pins.The board is equipped with 40-pins.A Through Hole axis is used to mount this electronic component on the board in order to get the best fit.A voltage of 4.5V supplies power to it.In order for 800μA to perform its full function, a supply current needs to be provided for it.The same can also be done with Analog to Digital Converters.In order to achieve high efficiency, it is recommended that the supply voltage be maintained at 5V.The power supply used for this machine is the 9V power supply.700mV is provided with the output voltage by it.ADC, DUAL-SLOPE converters are based on the voltage at the input and output of the source in order to convert the voltage.Spectrum bandwidth can be defined as 1 analog In channels.The 1 elements form the basis of it.
TC7106ARCPL Features
40-DIP (0.600, 15.24mm) package
TC7106A family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7106ARCPL Applications
There are a lot of Microchip Technology TC7106ARCPL display drivers applications.
- Calculators and meters
- Hand Held Instruments
- Numerlc and Non-Numerlc Panel Dlsplays
- Industrial Controllers and Instrumentation
- Industrial Control Indicator
- Small Appliances
- Bar-Graph Displays
- Driving common-cathode LED displays
- Instrumentation
- Metering
