TC7106CLW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Voltage - Supply | 9V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7106 |
| Pin Count | 44 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 1.23W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1.23W |
| Display Type | LCD |
| Negative Supply Voltage-Nom | -4.5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7106CLW Overview
Tube's package was designed similarly.The package contains version 44-LCC (J-Lead), which includes it.As far as the display type of this electrical device is concerned, it is LCD.This electronic component is mounted on the board using Surface Mount.During normal use, this electrical part has an operating temperature of 0°C~70°C.If you use a 9VV power source, it should work.An impedance-matching device is used to terminate transmission lines using a 44 termination.Display drivers belongs to TC7106 family.Devices are made up entirely of 44 pins.The board is equipped with 44-pins.As this electronic component is mounted on the board using the Surface Mount axis, we can adjust the position of the component.Power is provided by a voltage of 4.5V.There is a need to supply 800μA with the necessary supply current for it to function at full capacity.Including it in Analog to Digital Converters is also possible.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 5V.The voltage output by 700mV is provided by it.There are ADC, DUAL-SLOPE converters based on the source input voltage and the output voltage.A 1 analog channel in electromagnetic spectrum refers to the bandwidth.Designed using 3 Bits, this electronic part uses a large number of components.Drivers consists essentially of 1 elements.
TC7106CLW Features
44-LCC (J-Lead) package
TC7106 family
44 pin count
44 pins
ADC, DUAL-SLOPE converters
1 elements
TC7106CLW Applications
There are a lot of Microchip Technology TC7106CLW display drivers applications.
- Test Equipment
- Dlsplay Integrtty ls Compromissd
- Mobile projector
- Industrial control panels
- COPS? or Microprocessor Displays
- Professional Audio Equipment
- Panel meters
- Display Driver
- Numerlc and Non-Numerlc Panel Dlsplays
- Remote Displays
