TC7106CPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7106 |
| Pin Count | 40 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Supply Type | Single |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1.23W |
| Display Type | LCD |
| Negative Supply Voltage-Nom | -4.5V |
| Analog Input Voltage-Min | 2.7V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.95mm |
| Length | 53.21mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7106CPL Overview
Similar to Tube, the package has been designed in a similar manner.A package with version 40-DIP (0.600, 15.24mm) includes it.Display drivers has a Display type of LCD.The board mounts this electronic component using Through Hole.This electrical component operates at 0°C~70°C degrees Celsius.The 40 termination is used to terminate transmission lines with impedance-matched devices.The device belongs to the TC7106 family.Display drivers is equipped wDisplay driversh 40 pin count.The board is equipped with 40-pins.A Through Hole axis is used to mount this electronic component on the board in order to get the best fit.Powered by 4.5V, it has a voltage supply.The supply current of 800μA needs to be provided to fully play its function.Analog to Digital Converters can also include it.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 9V.Drivers is responsible for providing 700mV's output voltage.A ADC, DUAL-SLOPE converter can be selected based on the voltages input to the source and the voltages output to the source.A 1 analog In channel is a channel in the electromagnetic spectrum that represents a bandwidth.This electronic part was designed using 3 Bits as a design tool.The 1 elements form the basis of it.
TC7106CPL Features
40-DIP (0.600, 15.24mm) package
TC7106 family
40 pin count
40 pins
ADC, DUAL-SLOPE converters
1 elements
TC7106CPL Applications
There are a lot of Microchip Technology TC7106CPL display drivers applications.
- Battery Operated Applications
- Smart Display
- Car Audios / Radios
- Metering
- Automotive Telecom
- COPS? or Microprocessor Displays
- Augmented reality glasses
- Instrumentation
- LED Matrix Displays
- Test Equipment
