TC7107ACKW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7107A |
| Pin Count | 44 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Power Dissipation | 1W |
| Max Supply Current | 1.8mA |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1W |
| Display Type | LED |
| Dual Supply Voltage | 5V |
| Number of LEDs | 7 |
| Negative Supply Voltage-Nom | -4.5V |
| Number of Segments | 24 |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 2.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7107ACKW Overview
Tray has been designed similarly to this package.There is a version 44-QFP of the package that includes it as part of it.An electrical device of this type has a LED display.This electronic part is mounted in the way of Surface Mount.Electrical parts like this operate at 0°C~70°C temperatures.Typically, 44 terminations match the impedance of transmission lines.Display drivers belongs to TC7107A family.All of the device's pins are 44 pins.As a matter of fact, it has 44 pins installed.A Surface Mount-axis is used in the manufacturing of this electronic component for mounting on the board.There is a voltage of 4.5V applied to the supply voltage of this device.In order for 800μA to perform its full function, a supply current needs to be provided for it.The Seller Group has two 24 segments, representing the "Electronics" segment of any member of its equipment solutions business.Analog to Digital Converters can also include it as part of the equation.To ensure high efficiency, the supply voltage should be maintained at 5V.Display drivers operates from 9V power supplies.When the maximum current required for its operation reaches 1.8mA, the device is considered to be operational.The voltage output by 700mV is provided by it.There are ADC, DUAL-SLOPE converters based on the source input voltage and the output voltage.The electromagnetic spectrum has 1 analog In channels, which mean bandwidth.1 has experienced strong/weak growth in the number of channels.
TC7107ACKW Features
44-QFP package
TC7107A family
44 pin count
44 pins
9V power supplies
ADC, DUAL-SLOPE converters
TC7107ACKW Applications
There are a lot of Microchip Technology TC7107ACKW display drivers applications.
- Instrumentation
- Battery Operated Applications
- Mobile smart TV
- Small Appliances
- Metering
- High and Low Temperature Envlronment s where LCD
- Digital Clock, Thermometer, Counter, Voltmeter
- Remote Displays
- Industrial control panels
- Instrumentation Readouts
