TC7107CKW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7107 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Power Dissipation | 1W |
| Max Supply Current | 1.8mA |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1W |
| Display Type | LED |
| Dual Supply Voltage | 5V |
| Number of LEDs | 7 |
| Negative Supply Voltage-Nom | -4.5V |
| Number of Segments | 24 |
| Digits or Characters | A/D 3.5 Digits |
| Height | 2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7107CKW Overview
Display drivers is designed similarly to Tray.A package with version 44-QFP includes it.As far as the display type of this electrical device is concerned, it is LED.An electronic component is mounted on a board using Surface Mount.Display drivers is operating at 0°C~70°C degrees FahrenheDisplay drivers.The 44 termination is used to terminate transmission lines with impedance-matched devices.TC7107 devices are among the devices in this family.Devices are made up entirely of 44 pins.As a matter of fact, it has 44 pins installed.As this electronic component is mounted on the board using the Surface Mount axis, we can adjust the position of the component.A voltage of 4.5V supplies power to it.To ensure that 800μA plays its full role, the supply current must be provided so that the function of 800μA can be accomplished.Segments 24 refer to members of the Seller Group's equipment solutions business known as "Electronics".In addition, Analog to Digital Converters can include it.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 5V.The power supply for the system is supplied by 9V.When the maximum current required for its operation reaches 1.8mA, the device is considered to be operational.ADC, DUAL-SLOPE converters are based on the voltage at the input and output of the source in order to convert the voltage.A 1 analog channel in electromagnetic spectrum refers to the bandwidth.Electronic parts such as this one were designed with 3 Bits.Drivers consists primarily of 1 elements.
TC7107CKW Features
44-QFP package
TC7107 family
44 pin count
44 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7107CKW Applications
There are a lot of Microchip Technology TC7107CKW display drivers applications.
- High and Low Temperature Envlronment s where LCD
- Automotive Telecom
- Car Audios / Radios
- Mobile projector
- Healthcare Products
- Small Appliances
- Calculators and meters
- Industrial control panels
- Augmented reality glasses
- Voltmeter
