TC7116ACKW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7116A |
| Pin Count | 44 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 9V |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Operating Supply Current | 800μA |
| Power Dissipation | 1W |
| Number of Bits | 22 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 10mW |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LCD |
| Analog Input Voltage-Max | 3.35V |
| Output Format | PARALLEL, WORD |
| Analog Input Voltage-Min | 2.7V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 2.1mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7116ACKW Overview
Tray has been designed similarly to this package.The package contains version 44-QFP that includes it.Display drivers has a Display type of LCD.The board mounts this electronic component using Surface Mount.An electrical part like this operates at a temperature of 0°C~70°C.The 44 termination is used to terminate transmission lines with impedance-matched devices.Display drivers is a member of the TC7116A family.A device consists solely of 44 pins.Display drivers is designed wDisplay driversh 44 pins.The Surface Mount axis is used by the board manufacturer in order to mount this electronic component.There is a voltage of 9V applied to the supply voltage of this device.Display drivers is necessary for 800μA to be supplied wDisplay driversh current in order to perform Display driverss function properly.The same applies to Analog to Digital Converters.If high efficiency is to be achieved, the supply voltage should be maintained at 9V.Powered by two 9V power supplies, it can be operated anywhere in the world.As a result, it provides the output voltage of 700mV.The source input voltage and the output voltage are used to determine ADC, DUAL-SLOPE converters.There are 1 analog In channels, which mean bandwidth in the electromagnetic spectrum capable of carrying one 1 standard television signal that is delivered in an analog format.An electronic part of this design was made using 22 Bits.In terms of channel numbers, there has been a good/bad growth: 1.
TC7116ACKW Features
44-QFP package
TC7116A family
44 pin count
44 pins
9V power supplies
ADC, DUAL-SLOPE converters
TC7116ACKW Applications
There are a lot of Microchip Technology TC7116ACKW display drivers applications.
- Voltmeter
- Appliance control panels
- Climate Controls
- Bargraph Dlsplays
- Hand Held Instruments
- Wal4 and table clocks
- Calculators and meters
- White Goods Industrial Weighing
- Healthcare Products
- Vacuum Fluorescent Displays
