TC7116ACLW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Voltage - Supply | 9V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7116A |
| Pin Count | 44 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Operating Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Number of Bits | 22 |
| Converter Type | ADC, DUAL-SLOPE |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LCD |
| Output Format | PARALLEL, WORD |
| Analog Input Voltage-Min | 2.7V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7116ACLW Overview
Display drivers is packaged in the way of Tube.The package contains version 44-LCC (J-Lead), which includes it.An electrical device of this type has a LCD display.An electronic component is mounted on a board using Surface Mount.Display drivers is recommended that this electrical part be operated at a temperature of 0°C~70°C.Display drivers should work wDisplay driversh a 9VV power supply.Ending transmission lines with 44 terminations offers devices with the same characteristic impedance as the transmission lines themselves.The device belongs to the TC7116A family.There are a total of 21 44 pins on the device.As a matter of fact, it has 44 pins installed.The Surface Mount axis is the axis with which this electronic component is mounted on the board.An electrical supply voltage of 9V is used to power this device.A supply current must be supplied to 800μA for it to function fully.In addition to this, it can also be included in Analog to Digital Converters.If high efficiency is to be achieved, the supply voltage should be maintained at 5V.As far as power supply is concerned, it is powered by 9V power supplies.700mV is provided with the output voltage by it.A ADC, DUAL-SLOPE converter is based on the input voltage of the source and the output voltage of the destination.Analog In channels in the electromagnetic spectrum have 1 bandwidths.A 22 Bit was used to design this electronic component.A 1 element is basically what it is.
TC7116ACLW Features
44-LCC (J-Lead) package
TC7116A family
44 pin count
44 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7116ACLW Applications
There are a lot of Microchip Technology TC7116ACLW display drivers applications.
- Instrumentation Industrial Control
- Healthcare Products
- Bargraph Dlsplays
- Driving common-cathode LED displays
- Appliance control panels
- Instrumentation
- Wal4 and table clocks
- High and Low Temperature Envlronment s where LCD
- Smart Display
- Home Automation Goods
