TC7116ACPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7116A |
| Pin Count | 40 |
| Operating Supply Voltage | 9V |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Max Supply Current | 1.8mA |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 10mW |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LCD |
| Max Frequency | 48kHz |
| Number of A/D Converters | 1 |
| Number of Segments | 7 |
| Analog Input Voltage-Min | 2.4V |
| Touchscreen | No |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.06mm |
| Length | 52.45mm |
| Width | 14.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7116ACPL Overview
Display drivers is packaged in the way of Tube.There is a version 40-DIP (0.600, 15.24mm) of the package that includes it as part of it.The Display type of this electrical device is LCD.Mounting this electronic component on the board is done using Through Hole.Its operating temperature is 0°C~70°C.Typically, 40 terminations match the impedance of transmission lines.Among the TC7116A family of devices, this is one.A 40 pin is the component that makes up the entire device.With 40 pins, it is designed.The Through Hole axis is the axis with which this electronic component is mounted on the board.Display drivers is powered from a supply voltage of 9V.A supply current must be supplied to 800μA for it to function fully.A 7 segment is defined as any member of the Seller Group's equipment solutions business which is called "Electronics".The same can also be done with Analog to Digital Converters.Optimal efficiency requires a supply voltage of 9V.As far as power supply is concerned, it is powered by 9V power supplies.When the maximum current required for its operation reaches 1.8mA, the device is considered to be operational.As far as frequency is concerned, it operates at 48kHz H48kHz.A ADC, DUAL-SLOPE converter is based on the input voltage of the source and the output voltage of the destination.The electromagnetic spectrum has 1 analog In channels, which stand for bandwidth.Drivers was designed using 3 BDriverss.
TC7116ACPL Features
40-DIP (0.600, 15.24mm) package
TC7116A family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
TC7116ACPL Applications
There are a lot of Microchip Technology TC7116ACPL display drivers applications.
- Driving low-voltag fluorescent displays
- Vacuum Fluorescent Displays
- Automotive Telecom
- Bar Graphs and Matrix Displays
- Industrial Control Indicator
- LED Matrix Displays
- Remote Displays
- Display Driver
- Professional Audio Equipment
- COPS? or Microprocessor Displays
