TC7116CKW713
| Parameters | |
|---|---|
| Operating Supply Current | 800μA |
| Power Dissipation | 1W |
| Number of Bits | 22 |
| Converter Type | ADC, DUAL-SLOPE |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LCD |
| Output Format | PARALLEL, WORD |
| Analog Input Voltage-Min | 2.7V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 2.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 9V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7116 |
| Pin Count | 44 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
TC7116CKW713 Overview
As with Tape & Reel (TR), the package has been designed similarly.Display drivers is included in the package of version 44-QFP, so you can install Display drivers from there.The Display type of this electrical device is LCD.In order to mount this electronic component on the board, Surface Mount is used.During normal use, this electrical part has an operating temperature of 0°C~70°C.Display drivers should be possible to operate Display drivers wDisplay driversh a 9VV power source.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A TC7116 device is one of those in the TC7116 family.All of the pins in the device are 44 pins.The 44-pin design is what makes it so unique.As you can see from the image, this electronic component is mounted on the board using the Surface Mount axis.9V is the supply voltage.If 800μA is to function properly, it must be supplied with current.The same can also be done with Analog to Digital Converters.For high efficiency, the supply voltage should be maintained at 5V.Display drivers operates from 9V power supplies.Drivers is responsible for providing 700mV's output voltage.A ADC, DUAL-SLOPE converter is based on the input voltage of the source and the output voltage of the destination.In the electromagnetic spectrum, there are 1 analog In channels, which mean the bandwidth that is available.For the design of this electronic component, 22 Bits were used.Drivers consists of 1 elements.
TC7116CKW713 Features
44-QFP package
TC7116 family
44 pin count
44 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7116CKW713 Applications
There are a lot of Microchip Technology TC7116CKW713 display drivers applications.
- Display Driver
- Panel meters
- Digital Clock, Thermometer, Counter, Voltmeter
- Appliance control panels
- Dlsplay Integrtty ls Compromissd
- Instrument Clusters
- Professional Audio Equipment
- Industrial Controllers and Instrumentation
- High and Low Temperature Envlronment s where LCD
- Voltmeter
