TC7116CPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Power Rating | 10W |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Voltage - Supply | 9V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7116 |
| Pin Count | 40 |
| Output Voltage | 700mV |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1.23W |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LCD |
| Analog Input Voltage-Min | 2.4V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.06mm |
| Length | 52.45mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7116CPL Overview
Similar to Tube, the package has been designed in a similar manner.Version 40-DIP (0.600, 15.24mm) includes it.The Display type of this electrical device is LCD.In order to mount this electronic component on the board, Through Hole is used.Its operating temperature is 0°C~70°C.Using a 9VV power source should be sufficient.There are 40 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.One of the members of the TC7116 family of devices is this device.There are a total of 21 40 pins on the device.As it is designed with 40 pins, it can be mounted on a variety of surfaces.An electronic component is mounted on a board by way of a Through Hole-axis using the Through Hole-axis as a guide.There is a voltage of 9V applied to the supply voltage of this device.Display drivers is necessary to provide the 800μA wDisplay driversh a supply current in order for Display drivers to perform fully as intended.Analog to Digital Converters can also include it as part of the equation.Powered by two 9V power supplies, it can be operated anywhere in the world.The voltage output by 700mV is provided by it.A ADC, DUAL-SLOPE converter can be selected based on the voltages input to the source and the voltages output to the source.A 1 analog channel in electromagnetic spectrum refers to the bandwidth.Electronic parts such as this one were designed with 3 Bits.The 1 elements make up the structure.
TC7116CPL Features
40-DIP (0.600, 15.24mm) package
TC7116 family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7116CPL Applications
There are a lot of Microchip Technology TC7116CPL display drivers applications.
- Battery Operated Products
- COPS? or Microprocessor Displays
- Medical Equipment
- Bar Graphs and Matrix Displays
- Remote Displays
- Driving common-cathode LED displays
- Car Audios / Radios
- Appliance control panels
- Driving low-voltag fluorescent displays
- Auto dashboard displays
