TC7117CLW713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7117 |
| Pin Count | 44 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Operating Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Number of Bits | 22 |
| Converter Type | ADC, DUAL-SLOPE |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Dual Supply Voltage | 5V |
| Output Format | PARALLEL, WORD |
| Analog Input Voltage-Min | 2.7V |
| Number of Analog Inputs | 1 |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7117CLW713 Overview
As with Tape & Reel (TR), the package has been designed similarly.Display drivers is included in the package of version 44-LCC (J-Lead), so you can install Display drivers from there.Display type LED for this electrical device.Display drivers is mounted on the board wDisplay driversh the help of Surface Mount.Display drivers is operating at 0°C~70°C degrees FahrenheDisplay drivers.Transmission lines are terminated with 44 terminations using devices whose characteristic impedance matches that of the transmission line.A TC7117 device is one of those in the TC7117 family.All of the device's pins are 44 pins.The board is equipped with 44-pins.Display drivers is mounted using the Surface Mount axis on the board, so that the component can be easily removed.There is a voltage of 5V applied to the supply voltage of this device.There is a need to supply 800μA with the necessary supply current for it to function at full capacity.Including it in Analog to Digital Converters is also possible.For optimum efficiency, the supply voltage should be kept at 5V at all times.A 9V power supply allows it to function anywhere in the world.Using this function, you can obtain 700mV's output voltage.On the basis of the source input voltage and the output voltage, there are ADC, DUAL-SLOPE converters.Spectrum bandwidth can be defined as 1 analog In channels.A 22 Bit was used to design this electronic component.
TC7117CLW713 Features
44-LCC (J-Lead) package
TC7117 family
44 pin count
44 pins
9V power supplies
ADC, DUAL-SLOPE converters
TC7117CLW713 Applications
There are a lot of Microchip Technology TC7117CLW713 display drivers applications.
- Remote Displays
- Small Appliances
- Relay Driver
- Battery Operated Applications
- Industrial Display
- Calculators and meters
- High and Low Temperature Envlronment s where LCD
- Automotive Telecom
- Instrumentation Readouts
- Vacuum Fluorescent Displays
