TC7117CPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Power Rating | 10W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7117 |
| Pin Count | 40 |
| Output Voltage | 700mV |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Max Supply Current | 1.8mA |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1.23W |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Dual Supply Voltage | 5V |
| Number of LEDs | 7 |
| Number of Segments | 24 |
| Analog Input Voltage-Min | 2.4V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.572mm |
| Length | 52.4256mm |
| Width | 14.097mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7117CPL Overview
Tube-like design has been used for the package.Display drivers is embedded in the 40-DIP (0.600, 15.24mm) package.The Display type of this electrical device is LED.Mounting this electronic component on the board is done using Through Hole.This electrical part operates at temperature 0°C~70°C.Using 40 terminations, transmission lines are terminated with devices that will match the characteristic impedance of the lines.Display drivers belongs to TC7117 family.A 40 pin makes up the entire device.With 40 pins, it is designed.The Through Hole axis is used by the board manufacturer in order to mount this electronic component.Display drivers is powered from a supply voltage of 5V.For 800μA to function properly, it requires current supply.24 segments refer to any member of the Seller Group's equipment solutions business that falls under the category of "Electronics.".Display drivers can also be included into Analog to Digital Converters.In addition, it can be operated from anywhere in the world by two 9V power supplies.Its maximal current supply reaches 1.8mA.A voltage is output from it that represents the output voltage of 700mV.There are a number of ADC, DUAL-SLOPE converters available that are based on the source input voltage and the output voltage.A 1 analog In channel is a channel in the electromagnetic spectrum that represents a bandwidth.Designed using 3 Bits, this electronic part uses a large number of components.The 1 elements form the basis of it.
TC7117CPL Features
40-DIP (0.600, 15.24mm) package
TC7117 family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7117CPL Applications
There are a lot of Microchip Technology TC7117CPL display drivers applications.
- Wal4 and table clocks
- Instrument Clusters
- Avionics VFD Modules
- Medical Equipment
- Digital Clock, Thermometer, Counter, Voltmeter
- Industrial Controllers and Instrumentation
- Driving common-cathode LED displays
- Calculators and meters
- DC Plasma Displays
- Gaming Machines Security
