TC7126CPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Power Rating | 500mW |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7126 |
| Pin Count | 40 |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 55μA |
| Nominal Supply Current | 55μA |
| Power Dissipation | 1.23W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1.23W |
| Display Type | LCD |
| Analog Input Voltage-Max | 0.2V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.95mm |
| Length | 53.21mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7126CPL Overview
Display drivers is designed similarly to Tube.Display drivers is included in the package of version 40-DIP (0.600, 15.24mm), so you can install Display drivers from there.Display drivers has a Display type of LCD.Display drivers is mounted on the board wDisplay driversh the help of Through Hole.Display drivers is recommended that this electrical part be operated at a temperature of 0°C~70°C.Ending transmission lines with 40 terminations offers devices with the same characteristic impedance as the transmission lines themselves.Display drivers belongs to TC7126 family.The entire device is made up of 40 pins.As a result, it has 40 pins.The Through Hole axis is the axis with which this electronic component is mounted on the board.Display drivers is powered from a supply voltage of 9V.A supply current is required for 55μA to fully function.Display drivers can also be included into Analog to Digital Converters.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 9V.As far as power supply is concerned, it is powered by 9V power supplies.Depending on the source voltage and output voltage, ADC, DUAL-SLOPE converters are available.The electromagnetic spectrum has 1 analog In channels, which stand for bandwidth.Drivers was designed using 3 BDriverss.In general, it is composed of 1 elements.
TC7126CPL Features
40-DIP (0.600, 15.24mm) package
TC7126 family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
1 elements
TC7126CPL Applications
There are a lot of Microchip Technology TC7126CPL display drivers applications.
- General-purpose displays
- Numerlc and Non-Numerlc Panel Dlsplays
- Set-Top Boxes
- Panel meters
- Small Appliances
- Automotive Telecom
- Driving low-voltag fluorescent displays
- Mobile smart TV
- White Goods Industrial Weighing
- Car Audios / Radios
