TC74ACT373P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | TC74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 5.9 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 75mA 75mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.45mm |
| Length | 24.6mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74ACT373P Overview
20-DIP (0.300, 7.62mm) contains it. The package is in the form of Tube. There is a Tri-State output configured. This electrical device has a logic type of D-Type Transparent Latch. According to Through Hole, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. The TC74ACT series is associated with this FPGA. The design of this electronic part contains 8 bits. A device with this design has 20 terminations. This type belongs to the 74ACT373 family. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. It is part of the family of electronic devices called ACT. With the design of the board, there are only 20 pins. Through Hole is the way in which this electronic part is mounted. This device has a total of 2 ports. FF/Latches is the subcategory of this part. It operates from 5V power supplies. High efficiency requires a supply voltage of 5V.
TC74ACT373P Features
20-DIP (0.300, 7.62mm) package
TC74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
TC74ACT373P Applications
There are a lot of Toshiba Semiconductor and Storage TC74ACT373P Latches applications.
- Lamp and Display (LED)
- Counter control
- Meter applications
- Phase comparator
- Automatic test equipment
- Parallel data synchronization
- Synchronous frequency dividers
- Watches
- A/D converters
- Registers
