TC74ACT374P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | TC74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT374 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.6 ns |
| Quiescent Current | 8μA |
| Family | ACT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 75mA 75mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height Seated (Max) | 4.45mm |
| Length | 24.6mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74ACT374P Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. It is contained within the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. The FPGA belongs to the TC74ACT series. It should not exceed 160MHzin terms of its output frequency. The element count is 1 . There are 20 terminations,The 74ACT374family includes it. A voltage of 5V provides power to the D latch. There is 5pF input capacitance for this T flip flop. It is a member of the ACTfamily of D flip flop. A part of the electronic system is mounted in the way of Through Hole. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. In order to achieve its superior flexibility, 8 circuits are used. It runs on 5Vvolts of power. This flip flop has a total of 2ports. In terms of quiescent current, it consumes 8μA .
TC74ACT374P Features
Tube package
TC74ACT series
8 Bits
5V power supplies
TC74ACT374P Applications
There are a lot of Toshiba Semiconductor and Storage TC74ACT374P Flip Flops applications.
- CMOS Process
- Storage registers
- Power down protection
- Memory
- Frequency division
- Pattern generators
- EMI reduction circuitry
- Single Down Count-Control Line
- Data storage
- Circuit Design
