TC74HC373APF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | TC74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Delay Time - Propagation | 12ns |
| Height Seated (Max) | 4.45mm |
| Length | 24.6mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
TC74HC373APF Overview
Package 20-DIP (0.300, 7.62mm) includes it. It is packaged in the way of Tube. In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. It operates at a voltage of 2V~6V. There is a temperature of -40°C~85°C at which the system operates. It is a type of FPGA belonging to the TC74HC series. The design of this electronic part contains 8 bits. This device has 20 terminations. As a member of the 74HC373 family, it falls under that category. In order to function, the supply voltage should be set to 5V. 20 pins are included. HC/UH is the family name of this electronic device. 2 ports are available on this device. The part belongs to the FF/Latches subcategory. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. The device is powered by 2/6V power supplies. The supply voltage (Vsup) should be greater than 2V.
TC74HC373APF Features
20-DIP (0.300, 7.62mm) package
TC74HC series
8 Bits
74HC373 family
20 pin count
2/6V power supplies
TC74HC373APF Applications
There are a lot of Toshiba Semiconductor and Storage TC74HC373APF Latches applications.
- A/D converters
- Pattern generators
- Display driver
- Shift register
- General-Purpose Register
- Parallel Output
- Automotive Cluster
- Parallel Input
- Parallel Input
- BCD counting
