banner_page

TC74HC573APF

2V~6V 8 Bits Tri-State Latches TC74HC Series 74HC573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Toshiba Semiconductor and Storage
  • Nocochips NO: 830-TC74HC573APF
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 802
  • Description: 2V~6V 8 Bits Tri-State Latches TC74HC Series 74HC573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Delay Time - Propagation 17ns
Height Seated (Max) 4.45mm
Length 24.6mm
Width 7.62mm
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~85°C
Packaging Tube
Published 2001
Series TC74HC
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 4.5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74HC573
Pin Count 20
JESD-30 Code R-PDIP-T20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Ports 2
Number of Bits 8
Family HC/UH
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Latch
Output Polarity TRUE
Independent Circuits 1

TC74HC573APF Overview


In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. The package is in the form of Tube. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Latch. The electronic component is mounted according to the Through Hole method. A 2V~6V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the TC74HC series. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. 74HC573 is its family. In order to operate it, the supply voltage must be 4.5V. 20 pins are available on it. HC/UH is the family name of this electronic device. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It reaches 6V when the supply voltage (Vsup) reaches maximum. It is recommended that the supply voltage (Vsup) be greater than 2V.

TC74HC573APF Features


20-DIP (0.300, 7.62mm) package
TC74HC series
8 Bits
74HC573 family
20 pin count

TC74HC573APF Applications


There are a lot of Toshiba Semiconductor and Storage TC74HC573APF Latches applications.

  • Pattern generators
  • Network Switches
  • Automotive HEV/EV Powertrain
  • A/D converters
  • Pseudo-random code generators
  • Decade counting
  • Sample and hold register
  • General-Purpose Register
  • Automatic test equipment
  • Shift left register

Write a review

Note: HTML is not translated!
    Bad           Good