TC74HC590AP(F)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Series | TC74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 230 ns |
| Reset | Asynchronous |
| Family | HC |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 62MHz |
| Height | 3.5mm |
| Length | 19.25mm |
| Width | 6.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74HC590AP(F) Overview
In the 16-DIP (0.300, 7.62mm)package, it is supplied. It is configured with 16terminations. 5Vis fully flexible due to its voltage supply. A wire connects the 1elements. All component pins are equal to 16. Packaging is based on Tube. In the circuit, there are 16pins that connect other parts. The Through Holeway is used to mount it. The HCfamily is derived from it. With its TC74HCseries designation, it can be used for a range of applications. It is assumed that the logic type is [0]. Setting the operating temperature to -40°C~85°C is recommended. Using a Through Holemounting type, it is mounted. In the case of a supply voltage of [0], it operates more reliably. The array has 8elements. The base part number of 74HC590provides access to more related parts. Supply voltage (Vsup) can be as low as 2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
TC74HC590AP(F) Features
Embedded in the 16-DIP (0.300, 7.62mm) package
8 bits per element
TC74HC590AP(F) Applications
There are a lot of Toshiba Semiconductor and Storage TC74HC590AP(F) Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- Control counters
- ANALOG SIGNAL PROCESSING
- Programmable binary and decade
- LINEARIZATION
- Programmable decade counters
- Frequency dividers
- Frequency dividing circuits
- SQUARE ROOT
- Communications Digital Frequency Synthesizers;
