TC74VHCT574AFTEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | TC74VHCT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74VHCT574AFTEL Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. It belongs to the TC74VHCTseries of FPGAs. Its output frequency should not exceed 130MHz. The element count is 1 . There are 20 terminations,D latch belongs to the 74VHCT574 family. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 4pF farads. The electronic device belongs to the AHCT/VHCTfamily. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. Its flexibility is enhanced by 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are 5V power supplies attached to it. The flip flop contains 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. It consumes 4μA current. Furthermore, it has BROADSIDE VERSION OF 374as a characteristic.
TC74VHCT574AFTEL Features
Tape & Reel (TR) package
TC74VHCT series
20 pins
8 Bits
5V power supplies
TC74VHCT574AFTEL Applications
There are a lot of Toshiba Semiconductor and Storage TC74VHCT574AFTEL Flip Flops applications.
- Storage registers
- Digital electronics systems
- Functionally equivalent to the MC10/100EL29
- Shift Registers
- Clock pulse
- Common Clocks
- Cold spare funcion
- Load Control
- Computing
- Dynamic threshold performance
