TC74VHCT74AFTEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | TC74VHCT |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Family | AHCT/VHCT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 65 MHz |
| Max Frequency@Nom-Sup | 65000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
TC74VHCT74AFTEL Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Differential. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. The TC74VHCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 140MHz. D latch consists of 2 elements. There is 2μA quiescent consumption. A total of 14 terminations have been made. The 74VHCT74 family contains this object. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4pF farads. An electronic device belonging to the family AHCT/VHCTcan be found here. The RS flip flops belongs to FF/Latches base part number. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 4.5V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts.
TC74VHCT74AFTEL Features
Tape & Reel (TR) package
TC74VHCT series
5V power supplies
TC74VHCT74AFTEL Applications
There are a lot of Toshiba Semiconductor and Storage TC74VHCT74AFTEL Flip Flops applications.
- Instrumentation
- Safety Clamp
- Pattern generators
- Power down protection
- Balanced 24 mA output drivers
- Memory
- Registers
- Data transfer
- Data storage
- Count Modes
