TC7650CPA
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TC7650 |
| Pin Count | 8 |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 3.5mA |
| Slew Rate | 2.5V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 0.7μV |
| Gain | 130 dB |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 375Hz |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 730mW |
TC7650CPA Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. This is a Zero-Drift type op amp. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. The input offset voltage is 5μV. Through Hole is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Operational amplifier can operate supply current at 2mA. It is recommended to keep the voltage gain at 130dB at all times. There are 1 channels on the operational amplifiers. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 8V. During testing, the buffer amplifier resistance should remain within a range of 1 TΩ.
TC7650CPA Features
8 Pins
supply voltage of 5V
130dB voltage gain
Resistance of 1 TΩ
TC7650CPA Applications
There are a lot of Microchip Technology TC7650CPA Instrumentational OP Amps applications.
- Multiplication circuits
- Subtraction operation circuits
- Weak signal detection
- Biopotential
- Voltage regulation circuit
- Addition operation circuits
- Video amplifiers
- PDA
- Wireless base stations
- Gaming industry
