TC7650CPD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 1 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TC7650 |
| Pin Count | 14 |
| Operating Supply Voltage | 8V |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 800mW |
| Slew Rate | 2.5V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 0.7μV |
| Gain | 130 dB |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 4.06mm |
| Length | 19.56mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7650CPD Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Buffer amps of this type are called Zero-Drift-types. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. In terms of input offset voltage, operational amplifier rates 5μV. This electronic part is best mounted with type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 2mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 130dB. The op amp ic has 1 channels on it. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. 1 TΩ is the range in which the op amp resistance should lie.
TC7650CPD Features
14 Pins
supply voltage of 5V
130dB voltage gain
Resistance of 1 TΩ
TC7650CPD Applications
There are a lot of Microchip Technology TC7650CPD Instrumentational OP Amps applications.
- Computer workstations
- Switching amplifier
- High input resistance broadband
- High/low-pass filter circuit
- Differentiator circuits
- Band-stop filter
- ECG equipment
- Scintillation detectors
- Thermocouples
- Logarithmic operation circuits
