TC7660CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | -10V |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 10kHz |
| Base Part Number | TC7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Efficiency | 98 % |
| Output Voltage | -10V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive or Negative |
| Output Power | 730mW |
| Max Output Voltage | -10V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Synchronous Rectifier | No |
| Min Output Voltage | -1.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7660CPA Overview
For optimal performance, this voltage regulator makes use of the Tube package. There are 8 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHED CAPACITOR REGULATOR, it is a SWITCHED CAPACITOR REGULATOR-type voltage regulator. The space-saving 8-DIP (0.300, 7.62mm) package is available for this voltage regulator. A total of 1 outputs are configured in this voltage regulator. Fixed outputs are generated on the output pins of this adjusting voltage regulator. There is a switching regulator that is compatible with the Through Hole mounting. As long as its operating temperature is 0°C~70°C TA, dc to dc voltage regulator should perform well. DC DC switching regulator's output voltage (Min/Fixed) amounts to -Vin 2Vin. To meet the switching regulator operation requirements, a nominal input voltage of 5V is provided. I would like to point out that this voltage regulator belongs to the Other Analog ICs subcategory. In this case, the DC/DC regulator belongs to the family TC7660. Voltage of voltage regulator can be delivered at -10V volts. In order to operate voltage regulator, there are 8 pins that must be connected. In order for this switching regulator to work properly, the output voltage should be at least -1.5VV. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 20mA A. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of -10V. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.5V V. As long as the supply voltage is greater than 10V, the voltage regulator 12v will operate correctly. At a frequency of 10kHz, dc to dc voltage regulator is capable of maintaining high accuracy.
TC7660CPA Features
1 outputs
8 pins
TC7660CPA Applications
There are a lot of Microchip Technology TC7660CPA Voltage Regulators applications.
- Computer-related products
- Electrical distribution systems
- Flaw detection equipment
- Digital video recorders
- Special machining machine tools
- Solar power plants
- Access control systems
- Computer application technology
- Power supplies of electronic gadgets
- Hydraulic presses
