TC7660EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | -10V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Voltage - Input (Min) | 1.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 80μA |
| Output Configuration | Positive or Negative |
| Output Power | 470mW |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 10V |
| Switcher Configuration | DOUBLER INVERTER |
| Length | 4.9mm |
| Width | 3.91mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7660EOA713 Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. As you can see, this harley voltage regulator contains 8 terminations. A SWITCHED CAPACITOR REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. In order to save space, this voltage regulator is packaged in the 8-SOIC (0.154, 3.90mm Width) package. DC DC switching regulator is configured with 1 outputs. Adjusting voltage regulator's output pins generate Fixed output. This voltage regulator 12v fits the Surface Mount mounting. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. 10kHz is the switching frequency of this DC-DC switching regulator. Regulator 1.5V can operate with dc to dc voltage regulator's minimum input voltage 1.5V. The adjusting voltage regulator's output voltage (Min/Fixed) is -Vin 2Vin. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. An input voltage of 5V is required for switching regulator operation. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. DC/DC regulators such as this one belong to the TC7660 family of products. The voltage DC DC switching regulator can produce is -10V volts. To operate the voltage regulator 12v, 8 pins are required. A maximum output current of 20mA A is provided to meet the switching regulator operation requirements. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.5V V. An operating voltage of 10V is the maximum supply voltage DC DC switching regulator can operate at.
TC7660EOA713 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
TC7660EOA713 Applications
There are a lot of Microchip Technology TC7660EOA713 Voltage Regulators applications.
- Industrial robots
- USB circuits
- Various precision measuring detectors
- Imported equipment
- Milling machines
- Hydraulic presses
- Emergency lighting monitoring equipment
- Computed tomography (CT)
- Electric heating, lighting
- Access control systems
