TC7660SEOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7660S |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 12V |
| Output Voltage | -12V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 300μA |
| Output Configuration | Positive or Negative |
| Output Power | 470mW |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz~45kHz |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Length | 4.9mm |
| Width | 3.91mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7660SEOA713 Overview
As a result of the use of the Cut Tape (CT) package, the performance of this voltage regulator is optimized. During the development of this harley voltage regulator, 8 terminations were made. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHED CAPACITOR REGULATOR type. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-SOIC (0.154, 3.90mm Width) package. 1 outputs have been configured in the voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Fixed output generated. Surface Mount-mounting is compatible with this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. This DC-DC switching regulator has a switching frequency of 10kHz~45kHz. The output voltage of this voltage regulator (Min/Fixed) amounts to -Vin 2Vin volts. There is a voltage regulator maximum input voltage of 12V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 5V is required to meet the requirements of the switching regulator operation. The regulator voltage that you are looking at belongs to the subcategory Other Analog ICs. There is a DC/DC regulator in this family that belongs to the TC7660S family. A voltage of -12V volts can be generated by DC DC switching regulator. To operate the voltage regulator 12v, 8 pins are required. Voltage regulator's maximal output current reaches 20mA A to meet the operation requirements. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.5V V. A maximum supply voltage of 12V is required for adjusting voltage regulator to operate.
TC7660SEOA713 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
TC7660SEOA713 Applications
There are a lot of Microchip Technology TC7660SEOA713 Voltage Regulators applications.
- CNC system
- Thermal power
- Photovoltaic power
- Scientific research
- Linear guide
- Flexible manufacturing cells
- Wind power
- Industrial robots
- Solar power plants
- Balance equipment
