TC7662BEOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 10kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7662B |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | -15V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive or Negative |
| Power Dissipation | 470mW |
| Output Power | 470mW |
| Max Output Voltage | -1.5V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz~35kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | -15V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7662BEOA Overview
optimized performance is achieved by utilizing the Tube package in this voltage regulator. Throughout this voltage regulator, there are 8 terminations. A SWITCHED CAPACITOR REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Space savings are achieved by placing this voltage regulator in the 8-SOIC (0.154, 3.90mm Width) package. 1 outputs have been configured in the voltage regulator 12v. The adjusting voltage regulator generates Fixed output. The voltage regulator 12v fits the Surface Mount mounting hole. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. 10kHz~35kHz is the switching frequency of this DC-DC switching regulator. DC DC switching regulator's output voltage (Min/Fixed) amounts to -Vin 2Vin. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 5V to meet the operation requirements. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. As a member of the TC7662B family of DC/DC regulators, this is a DC/DC regulator. A voltage of -15V volts can be produced by voltage regulator. The switching regulator operation of the system is controlled by 8 pins. The output voltage of this voltage regulator 12v should at least be set at -15V volts at all times. A maximum output current of 20mA A is available to meet the switching regulator operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of -1.5V. In this case, a dc to dc voltage regulator's minimum supply voltage of 1.5V volts is required to ensure reliable performance. DC DC switching regulator can operate from a maximum supply voltage of 15V. DC DC switching regulator's high accuracy can be maintained with a frequency of 10kHz.
TC7662BEOA Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
TC7662BEOA Applications
There are a lot of Microchip Technology TC7662BEOA Voltage Regulators applications.
- seismic instrument power circuits
- Product burn-in
- Driver circuits
- Electrical power transmission
- CMM
- Serial communication converter
- Series voltage regulation circuits
- Surface processing equipment
- Wide-range voltage regulation circuits
- Radio equipment
