TC7662BEOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC7662B |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | -15V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Voltage - Input (Min) | 1.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive or Negative |
| Output Power | 470mW |
| Max Output Voltage | -15V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz~35kHz |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7662BEOA713 Overview
For optimal performance, this voltage regulator uses the Cut Tape (CT) package. In this voltage regulator, there are 8 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR REGULATOR ICs, which are the ones used in older voltage regulator 12vs. For space-saving purposes, this voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. The voltage regulator is configured with 1 outputs. There are output pins on this DC DC switching regulator that generate Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. In this voltage regulator 12v, the switching frequency is 10kHz~35kHz. This voltage regulator is able to operate with the minimal input voltage of 1.5V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to -Vin 2Vin. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 5V as the nominal input voltage. Listed under the subcategory of Other Analog ICs is this voltage regulator 12v. TC7662B is a family of voltage regulators that belong to the DC/DC industry. Voltage regulator is capable of giving voltage at -15V volts. The switching regulator operation of the system is controlled by 8 pins. A maximum output current of 20mA A is available to meet the switching regulator operation requirements. With a maximum output voltage of -15V, DC DC switching regulator has a very high efficiency. 1.5V V supply voltage ensures reliable performance of adjusting voltage regulator. DC DC switching regulator can be operated from a voltage of 15V as its maximum supply voltage.
TC7662BEOA713 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
TC7662BEOA713 Applications
There are a lot of Microchip Technology TC7662BEOA713 Voltage Regulators applications.
- Sink circuits
- Series voltage regulation circuits
- Digital display device
- Radio equipment
- Energy management systems
- Computer-related products
- Computed tomography (CT)
- ATMs
- Plate bending machines
- Gear/thread machining machines
