TC7W74FKTE85LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 8 |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 67MHz |
| Polarity | Non-Inverting |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 26 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 13 ns |
| Logic Function | AND, D-Type |
| Number of Bits per Element | 1 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 5pF |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC7W74FKTE85LF Overview
In the form of SSOP, it has been packaged. It is contained within the Cut Tape (CT)package. There is an electronic part mounted in the way of Surface Mount. This board is designed with 8pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. 2μAquiescent current consumed. It is set to -5.2mAfor the high level output current. It is set to 5.2mAfor low level output current. It is recommended that the operating temperature be lower than 85°C. It should be higher than -40°Cwhen the system is operating. The minimum voltage required for operation is 2V. In this case, it supports a maximum supply voltage of 6V. A frequency of 67MHzcan be achieved.
TC7W74FKTE85LF Features
Cut Tape (CT) package
8 pins
TC7W74FKTE85LF Applications
There are a lot of Toshiba TC7W74FKTE85LF Flip Flops applications.
- Registers
- High Performance Logic for test systems
- Bounce elimination switch
- Memory
- Cold spare funcion
- Bus hold
- Storage registers
- Digital electronics systems
- Individual Asynchronous Resets
- QML qualified product
