TC850CLW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Power Rating | 20mW |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC850 |
| Pin Count | 44 |
| Output Voltage | 4.9V |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Configuration | MUX-ADC |
| Number of Channels | 1 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1.23W |
| Number of Bits | 15 |
| Input Type | Differential |
| Architecture | Dual Slope |
| Converter Type | ADC, MULTI-SLOPE |
| Supply Type | Dual |
| Reference Type | External |
| Data Interface | Parallel |
| Resolution | 1.875 B |
| Sampling Rate | 40 sps |
| Voltage - Supply, Analog | ±5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 40 |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 2 LSB |
| Dual Supply Voltage | 5V |
| Negative Supply Voltage-Nom | -5V |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC850CLW Overview
The analogue to digital converter is designed with 15 Bits.The AD converter is embedded in the 44-LCC (J-Lead) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 44 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 44 pin count.The peak reflow temperature (Cel) amounts to 245 to be essentially indestructible.There are ADC, MULTI-SLOPE converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 40 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is Dual Slope.There are 44 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.875 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TC850 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Dual.ADC converters can be mounted using Surface Mount.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 1.23W. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.23W.The number of channels is growing strong/weak: 1.The dual supply type of this electronic AD converter is 5V.The output voltage is maintain at 4.9V.
TC850CLW Features
1 Functions
44 basic kinds of terminations
44 pin count
TC850CLW Applications
There are a lot of Microchip Technology TC850CLW ADC applications.
- Spectrum Analysis
- 3-phase power control
- Battery Operated Systems
- Imaging Systems
- Wireless and wired broadband communications
- Digital signal processing
- Transducer
- Communication Systems
- Medical Instrumentation and medical imaging
- Industrial Process Control
