TC913ACPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TC913A |
| Pin Count | 8 |
| Operating Supply Voltage | 8.3V |
| Number of Elements | 3 |
| Number of Channels | 2 |
| Operating Supply Current | 650μA |
| Nominal Supply Current | 650μA |
| Power Dissipation | 730mW |
| Slew Rate | 2.5V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 90pA |
| Voltage - Supply, Single/Dual (±) | 7V~16V ±3.5V~8.3V |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 5μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00009μA |
| Dual Supply Voltage | 5V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
TC913ACPA Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Op amps are Zero-Drift types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are included on the operational amplifiers. Op amp ic rates 15μV for input offset voltage. This electronic part is best mounted with type Through Hole. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 650μA , this buffer op amp will be able to operate. The voltage gain should stay at 120dB. There are 2 channels on the operational amplifiers. There is a rating of 3 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 8.3V voltage.
TC913ACPA Features
8 Pins
supply voltage of 5V
120dB voltage gain
TC913ACPA Applications
There are a lot of Microchip Technology TC913ACPA Instrumentational OP Amps applications.
- Power transmission
- Automatic control
- Non-polarized electrodes
- Broadcasting
- Information processing
- Mobile phone
- Exponential operation circuits
- Wireless base stations
- Multimedia playback equipment
- Power control
