TC913BCOA

2 Channels 120pA 100 dB Instrumentational OP Amps 0.004μA 8.3V 7V~16V ±3.5V~8.3V TC913B 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-TC913BCOA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 901
Description: 2 Channels 120pA 100 dB Instrumentational OP Amps 0.004μA 8.3V 7V~16V ±3.5V~8.3V TC913B 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Average Bias Current-Max (IIB)	0.004μA
Power Supply Rejection Ratio (PSRR)	100dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	9V
Voltage - Input Offset	15μV
Low-Bias	YES
Micropower	YES
Max Frequency	200Hz
Dual Supply Voltage	5V
Height	1.5mm
Length	5mm
Width	3.99mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	TC913B
Pin Count	8
Operating Supply Voltage	8.3V
Number of Elements	3
Number of Channels	2
Operating Supply Current	650μA
Nominal Supply Current	1.1mA
Power Dissipation	470mW
Slew Rate	2.5V/μs
Architecture	CHOPPER-STAB
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	100 dB
Current - Input Bias	120pA
Voltage - Supply, Single/Dual (±)	7V~16V ±3.5V~8.3V
Input Offset Voltage (Vos)	30μV
Bandwidth	1.5MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1500 kHz
Voltage Gain	120dB

TC913BCOA Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a Zero-Drift-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 30μV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. This op amp can operate from a supply current at 650μA. Maintain 120dB as the voltage gain. There are a total of 2 channels available on the op amps. It is possible to count 3 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8.3V voltage.