TC962CPA
| Parameters | |
|---|---|
| Synchronous Rectifier | No |
| Nominal Input Voltage | 18V |
| Min Output Voltage | -18V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | -18V |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 24kHz |
| Base Part Number | TC962 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | -18V |
| Output Type | Fixed |
| Max Output Current | 80mA |
| Input Voltage-Nom | 15V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Output Configuration | Positive or Negative |
| Output Power | 730mW |
| Max Output Voltage | -3V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 12kHz~24kHz |
TC962CPA Overview
This harley voltage regulator utilizes the Tube package for optimized performance. In this voltage regulator, 8 terminations are present. There is a SWITCHED CAPACITOR CONVERTER type analog IC in this voltage regulator 12v that is used to convey analog signals. For space-saving purposes, this voltage regulator is available in the 8-DIP (0.300, 7.62mm) package. The voltage regulator 12v has 1 outputs. On its output pins, this adjusting voltage regulator generates Fixed output. This voltage regulator 12v fits the Through Hole mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at 0°C~70°C TA. There is a switching frequency of 12kHz~24kHz for this voltage regulator 12v. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to -Vin 2Vin Vin/2. An input voltage of 15V is required for switching regulator operation. The regulator voltage that you are looking at belongs to the subcategory Other Analog ICs. TC962 is a family of voltage regulators that belong to the DC/DC industry. The adjusting voltage regulator's output voltage is maintain at -18V. The switching regulator operation is carried out by 8 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least -18V. The maximum output current reaches 80mA A to meet the switching regulator operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of -3V. In this case, a dc to dc voltage regulator's minimum supply voltage of 3V volts is required to ensure reliable performance. The maximum supply voltage for the voltage regulator 12v is 18V, so DC DC switching regulator can operate with a maximum voltage of 18V. With a frequency of 24kHz, dc to dc voltage regulator has high accuracy.
TC962CPA Features
1 outputs
8 pins
TC962CPA Applications
There are a lot of Microchip Technology TC962CPA Voltage Regulators applications.
- Smart grid
- Medical equipment
- Window air conditioners
- Hydraulic presses
- Access control systems
- Digital video recorders
- Game consoles
- Emergency lighting monitoring equipment
- Handheld GPS
- Constant current circuits
