TCA0372DM2ELG
| Parameters | |
|---|---|
| Length | 10.5mm |
| Width | 5.45mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCA0372 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Output Current | 1A |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 5V~40V ±2.5V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 15mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Nominal Gain Bandwidth Product | 1.4MHz |
| Height | 730μm |
TCA0372DM2ELG Overview
A 16-SOIC (0.209, 5.30mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 16h termination of the year. The total number of pins on linear amplifier is 16. This linear amplifier should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 16 pins on it. Regarding input offset voltage, op amp rates 15mV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. You can run this op amp ic on 5mA . It is recommended to keep the voltage gain at 100dB at all times. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 20V voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL.
TCA0372DM2ELG Features
16 Pins
supply voltage of 15V
100dB voltage gain
TCA0372DM2ELG Applications
There are a lot of ON Semiconductor TCA0372DM2ELG Instrumentational OP Amps applications.
- Gaming industry
- Switching amplifier
- Logarithmic operation circuits
- Thermocouples
- Large motor controllers
- ECG equipment
- Active probe
- Instrumentation
- Signal filtering
- Power transmission
