TCA0372DP1
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifiers |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TCA0372 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Output Current | 1A |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 5V~40V ±2.5V~20V |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Nominal Gain Bandwidth Product | 1.4MHz |
| Power | YES |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TCA0372DP1 Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiersed as a Operational Amplifiers-type device. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . A supply current of 5mA can be used to operate this linear amplifier. Op amp is a member of the 100dB's 100dB family. The buffer amp consists of 2 circuits in total. The operating supply voltage of instrumentation amplifier is rated 20V voltage. RAIL is adopted to pack the instrumentation amplifier.
TCA0372DP1 Features
8 Pins
supply voltage of 15V
100dB voltage gain
TCA0372DP1 Applications
There are a lot of ON Semiconductor TCA0372DP1 Instrumentational OP Amps applications.
- Weak signal detection
- Industrial control system
- Weighing systems
- Cinema or auditorium audio system
- Large motor controllers
- Navigation
- PDA
- Home audio systems
- Video computer boards
- Tablets
