TCA0372DWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCA0372 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Output Current | 1A |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 5V~40V ±2.5V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Nominal Gain Bandwidth Product | 1.4MHz |
| Height | 2.25mm |
| Length | 10.15mm |
| Width | 7.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCA0372DWG Overview
There is a 16-SOIC (0.295, 7.50mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 16 terminations over the past year. A total of 16 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 16 pins. In terms of input offset voltage, operational amplifier rates 15mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 5mA volt supply current is needed for this linear amplifier to operate. 100dB should remain the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 20V. The linear amplifier is packaged by using a RAIL axis.
TCA0372DWG Features
16 Pins
supply voltage of 15V
100dB voltage gain
TCA0372DWG Applications
There are a lot of ON Semiconductor TCA0372DWG Instrumentational OP Amps applications.
- Strain gauges
- Radiation thermometry transducers
- Fission chambers
- Division circuits
- Comparator
- Addition operation circuits
- Proportional operation circuits
- Multiplication circuits
- Signal operation
- Commercial audio systems
