TCA6507PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Frequency | 100kHz 400kHz |
| Base Part Number | TCA6507 |
| Pin Count | 14 |
| Number of Outputs | 7 |
| Power Supplies | 1.8/3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Output Current | 40mA |
| Max Supply Current | 25μA |
| Voltage - Output | 5.5V |
| Topology | Boost |
| Min Input Voltage | 1.65V |
| Max Input Voltage | 3.6V |
| Output Characteristics | OPEN-DRAIN |
| Output Current per Channel | 40mA |
| Input Characteristics | STANDARD |
| Low Level Output Current | 40mA |
| fmax-Min | 23 MHz |
| Dimming | I2C, SMBus |
| Number of Segments | 7 |
| Switching Frequency | 400kHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCA6507PW Overview
There is a 14-TSSOP (0.173, 4.40mm Width) package on the board that is used to save space. In this LED driver, there are 7 outputs.Surface Mount is used to mount the led driver.With high reliability and efficiency, this emerges as a Linear.The LED driver is capable of operating at a temperature of -40°C~125°C TA.A frequency of 100kHz 400kHz is used as the basis for operation.In this case, it operates with terminations of 0.The configuration of the board is built around 14 pins.There are 7 segments in it.The LED driver is available under the part number TCA6507.3.6V is an acceptable maximum value for the supply voltage.The output voltage is 5.5V.It consists of 14 pins.Additionally, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 1.65V.The maximum efficiency can be achieved by operating it at a minimal voltage of 1.65V.3.6V is the maximum value of the supply current.If the maximum supply current is less than 25μA, the device is capable of providing high efficiency.Loads can only be powered by 40mA current.As long as the switching frequency is maintained at 400kHz, this electronic component is able to perform all of its functions properly.
TCA6507PW Features
Available in the 14-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz 400kHz
Supply voltage of 1.8V
Switching frequency of 400kHz
TCA6507PW Applications
There are a lot of Texas Instruments TCA6507PW LED Driver ICs applications.
- Medical surgery lighting
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED headlights
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for portable equipment
- Portable lighting
- General lighting
- Gallery lighting
- Sports Facility Lighting
