TCK102G,LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA |
| Number of Pins | 6 |
| Supplier Device Package | 6-BGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2014 |
| Feature | Slew Rate Controlled |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 180mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 50mOhm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TCK102G,LF Overview
It is packaged in the form of a Digi-Reel?.Package 6-UFBGA contains it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It is equipped with Slew Rate Controlled features.It is necessary to use the 6 pins in order to operate the LED driver.In this case, the LED driving board can produce only 1AV as its maximum output.To meet the operation criteria, the maximum output current drops to 1A.In this case, it is mounted in the way of Surface Mount.It has a resistance of 180mOhm.The output current is set to 1A in this case.The supply voltage should be set at 5.5V for best efficiency.For stable operation, the maximum operating temperature is 85°C°C.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.There is a maximum current requirement of 20μA for its operation.
TCK102G,LF Features
Resistance of 180mOhm
TCK102G,LF Applications
There are a lot of Toshiba Semiconductor and Storage TCK102G,LF Power Switches ICs applications.
- Notebook PC
- Wireless Modem Data Cards
- Wearable Devices
- USB Protection
- Portable GPS Device
- USB3.1 Power Delivery
- HDD, SSD
- Wireless Headsets
- Portable GPS
- Smartphone and PDA
