TCK104G,LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Supplier Device Package | 6-WCSPB (0.80x1.2) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 171mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 800mA |
| Output Configuration | High Side |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 65μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 130 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 9 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50mOhm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TCK104G,LF Overview
A Tape & Reel (TR) is used to package it.The 6-UFBGA, WLCSP package includes it.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of P-Channel volts.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.For operation, we use the 6 pins.The LED driver output is limited to 800mAV.The maximum output current must drop to 800mA to meet the operation criteria.Surface Mount is mounted in the way.There is 171mOhm resistance on the LED driver.The output current is set to 800mA in this case.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.It is designed to be stable at 85°C°C, which is the maximum operating temperature.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.It requires a maximum current requirement of 65μA.
TCK104G,LF Features
Resistance of 171mOhm
TCK104G,LF Applications
There are a lot of Toshiba Semiconductor and Storage TCK104G,LF Power Switches ICs applications.
- USB Protection
- USB Power Distribution
- Hot Swap
- Hot Swaps
- HDD, SSD
- Set-Top Boxes
- PC Card Hot Swap
- Portable GPS
- Portable Devices
- Gaming
