TCK106G,LF

P-Channel PMIC 4 Pin 4-UFBGA

Manufacturer: Toshiba Semiconductor and Storage
Nocochips NO: 830-TCK106G,LF
Package: 4-UFBGA
Datasheet: -
Stock: 394
Description: P-Channel PMIC 4 Pin 4-UFBGA (Kg)

Details

Tags

Parameters
Output Type	P-Channel
Max Output Current	1A
Operating Supply Voltage	5.5V
Interface	On/Off
Output Configuration	High Side
Output Current	1A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	200nA
Input Type	Non-Inverting
Switch Type	General Purpose
Ratio - Input:Output	1:1
Voltage - Load	1.1V~5.5V
Rds On (Typ)	49m Ω
Radiation Hardening	No
RoHS Status	RoHS Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	4-UFBGA
Number of Pins	4
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2014
Feature	Slew Rate Controlled
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	225mOhm
Max Power Dissipation	800mW
Number of Outputs	1

TCK106G,LF Overview

It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 4-UFBGA package that includes it.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of P-Channel volts.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.It is necessary to use the 4 pins in order to operate the LED driver.The maximum output current must drop to 1A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 225mOhm ohms.This results in a 1A output current.For maximum efficiency, the supply voltage should be set to 5.5V.It requires a maximum current requirement of 200nA.