Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-UFBGA |
Number of Pins |
4 |
Supplier Device Package |
4-WCSP (0.79x0.79) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Published |
2014 |
Feature |
Load Discharge, Slew Rate Controlled |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
225mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
800mW |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
1A |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Current - Output (Max) |
1A |
Output Configuration |
High Side |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
200nA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.1V~5.5V |
Rds On (Typ) |
49mOhm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
TCK107G,LF Overview
As a result, it is packaged in the form of a Cut Tape (CT).This package is included in 4-UFBGA.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Load Discharge, Slew Rate Controlled.The 4 pins are used for the operation of the system.The lighting driver's maximum output is 1AV.The maximum output current must drop to 1A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.In this case, there is 225mOhm resistance in the LED driving board.It is set to 1A in this case.A supply voltage of 5.5V is recommended for maximum efficiency.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.It has a maximum current requirement of 200nA.
TCK107G,LF Features
Resistance of 225mOhm
TCK107G,LF Applications
There are a lot of Toshiba Semiconductor and Storage TCK107G,LF Power Switches ICs applications.
- HDD and SSD
- Set-top-box
- Portable GPS Device
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- PC Cards
- Smartphone and PDA
- Hard Disk Drives
- Hot Swap