Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
4-XFBGA, CSPBGA |
Supplier Device Package |
4-WCSP (0.90x0.90) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
Feature |
Slew Rate Controlled |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
18.4mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
800mW |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
2A |
Interface |
On/Off |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
750mV |
Current - Output (Max) |
2A |
Output Configuration |
High Side |
Output Current |
2A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
75 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
8 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
0.75V~3.6V |
Fault Protection |
Reverse Current |
Rds On (Typ) |
18.1mOhm |
RoHS Status |
RoHS Compliant |
TCK206G,LF Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 4-XFBGA, CSPBGA package.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There are Slew Rate Controlled features available on the LED driving board.The maximum output of the LED driving board is 2AV.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.Lighting drivers with 18.4mOhm resistance are used.It is set to 2A in this case.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.There is a maximum voltage of 3.6VV that it can handle.Supply voltages as low as 750mVV are possible.
TCK206G,LF Features
Resistance of 18.4mOhm
TCK206G,LF Applications
There are a lot of Toshiba Semiconductor and Storage TCK206G,LF Power Switches ICs applications.
- HDD and SSD
- Portable Devices
- Portable GPS
- Portable Music Players
- USB Protection
- Hot-Swap Systems
- HDD, SSD
- Portable GPS Device
- Notebook and Tablet Computers
- PC Cards