TCK207G,LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, CSPBGA |
| Supplier Device Package | 4-WCSP (0.90x0.90) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 18.4mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 750mV |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 8 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 18.1mOhm |
| RoHS Status | RoHS Compliant |
TCK207G,LF Overview
It is packaged in the manner of a Tape & Reel (TR).Package 4-XFBGA, CSPBGA contains it.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Load Discharge, Slew Rate Controlled.There is a maximum output of 2AV from the LED driver.Maximum output current falls to 2A when operation criteria are met.There is 18.4mOhm resistance on the LED driver.The output current is set to 2A in this case.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.There is a maximum voltage of 3.6VV that it can handle.A supply voltage of 750mVV is sufficient for it to work.
TCK207G,LF Features
Resistance of 18.4mOhm
TCK207G,LF Applications
There are a lot of Toshiba Semiconductor and Storage TCK207G,LF Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- USB Protection
- Hard Disk Drives
- Mobile Communication Devices
- Set-top-box
- Wireless Headsets
- Various applications equipped with buttons
- PC Cards
- PDAs
