TCM809LVNB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 12μA |
| Nominal Supply Current | 12μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.06mA |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM809LVNB713 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. There are 3 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 12μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to TCM809, which is the base power ics number. To operate this power management, you will need at least 5V volts of power.
TCM809LVNB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
TCM809LVNB713 Applications
There are a lot of Microchip Technology TCM809LVNB713 Voltage Supervisors applications.
- Refrigeration
- Data storage applications
- Utility meter
- Important electronics for automotive protection
- Set top box
- Satellite navigation
- Electronics installed in the vehicle
- Radar
- Computer applications
- Automotive permanent magnet synchronous motors
