Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.96mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TCM809 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
12μA |
Nominal Supply Current |
12μA |
Power Dissipation |
320mW |
Adjustable Threshold |
NO |
Quiescent Current |
12μA |
Accuracy |
1.5 % |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
4.38V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
4.31V |
Max Reset Threshold Voltage |
4.45V |
Threshold Voltage |
+4.38V |
Undervoltage Threshold |
4.31V |
Overvoltage Threshold |
4.45V |
Height |
1.02mm |
Length |
3.05mm |
Width |
1.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TCM809MENB713 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. It is packaged with Cut Tape (CT). To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. A total of 3 pins are located on this power management. 3 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 12μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TCM809, the base power ics number.
TCM809MENB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
TCM809MENB713 Applications
There are a lot of Microchip Technology TCM809MENB713 Voltage Supervisors applications.
- Precision measurement
- WiFi router
- Unattended substation automation
- Electric heating appliances
- Radio
- Dash board
- Network equipment
- Smart meter
- Smartphones
- Stable power system