TCM809MVLB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 12μA |
| Nominal Supply Current | 12μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TCM809MVLB713 Overview
As you can see, this power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SC-70, SOT-323 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 3 pins are present in total in this power management. Power managment ic pin count is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 12μA. You can always use TCM809, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 5V power to power this power management.
TCM809MVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
TCM809MVLB713 Applications
There are a lot of Microchip Technology TCM809MVLB713 Voltage Supervisors applications.
- Medical-specific isolation transformer
- Data storage applications
- Utility meter
- FPGA design
- Electronics installed in the vehicle
- Important electronics for automotive safety
- Power distribution systems of ICU
- Electrical fire monitoring system
- Solar power charger
- Unattended substation automation
