TCM809RENB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Lead Pitch | 2.05mm |
| Max Output Current | 20mA |
| Row Spacing | 2.64 mm |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Accuracy | 1.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Height | 1.02mm |
| Length | 3.05mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM809RENB713 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Cut Tape (CT). As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 3 pins on IC management. This power management has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 9μA. It is always advisable to use TCM809, the base supervisor number, when searching for similar PMICs from the manufacturer.
TCM809RENB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM809RENB713 Applications
There are a lot of Microchip Technology TCM809RENB713 Voltage Supervisors applications.
- Battery cars
- Power distribution systems of infant care room
- Set top box
- Automotive permanent magnet synchronous motors
- Power communication system
- Household appliances
- DVR
- Rechargeable batteries
- Display equipment
- FPGA design
