TCM809RVLB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Lead Pitch | 1.3mm |
| Max Output Current | 20mA |
| Power Supplies | 3V |
| Row Spacing | 2.4 mm |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TCM809RVLB713 Overview
There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3V. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. There are 3 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 9μA. You can always use TCM809, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 3V power to power this power management.
TCM809RVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM809RVLB713 Applications
There are a lot of Microchip Technology TCM809RVLB713 Voltage Supervisors applications.
- Leakage protection
- Solar power charger
- Important electronics for automotive safety
- Automotive permanent magnet synchronous motors
- Household appliances
- Computer applications
- Radar
- DVR
- WiFi router
- Rechargeable batteries
