TCM809RVNB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TCM809RVNB713 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. When 3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. This power management has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 9μA. A similar IC managements number of the manufacturer can always be found by using TCM809, the base power ics number. A power supply of 3V watts is required for the operation of this power management.
TCM809RVNB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM809RVNB713 Applications
There are a lot of Microchip Technology TCM809RVNB713 Voltage Supervisors applications.
- Refrigeration
- Precision measurement
- Power distribution systems of infant care room
- Important electronics for automotive safety
- Satellite navigation
- WiFi router
- Power distribution systems of ICU
- Functional modules
- Military communications
- Microprocessor system
