TCM809ZENB713
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 2.28V |
| Max Reset Threshold Voltage | 2.35V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.28V |
| Overvoltage Threshold | 2.35V |
| Length | 2.92mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
TCM809ZENB713 Overview
It is mounted through 3 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. When 2.5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 3 pins that are attached to IC management. There are 3 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. To find similar IC managements from the manufacturer, you can always search by TCM809.
TCM809ZENB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM809ZENB713 Applications
There are a lot of Microchip Technology TCM809ZENB713 Voltage Supervisors applications.
- Unattended substation automation
- Military communications
- Low voltage/high power - AI, GPU
- Utility meter
- Medical-specific insulation monitor
- Dash board
- Functional modules
- Personal computers
- Power distribution systems of infant care room
- Important electronics for automotive protection
