TCM809ZVNB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 9μA |
| Power Dissipation | 320mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.28V |
| Max Reset Threshold Voltage | 2.35V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.28V |
| Overvoltage Threshold | 2.35V |
| Height | 1.12mm |
| Length | 3.04mm |
| Width | 2.64mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCM809ZVNB713 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. When 2.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 3 pins in it. Power managment ic pin count is 3. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. It is always advisable to use TCM809, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 2.5V volts of power.
TCM809ZVNB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM809ZVNB713 Applications
There are a lot of Microchip Technology TCM809ZVNB713 Voltage Supervisors applications.
- Military electronics
- Detection of phase imbalance
- Utility meter
- Transformer load monitoring equipment
- Cloud computing
- Power distribution systems of operating room
- Battery cars
- Digitally controlled LDO regulators circuit
- emergency room
- Smart meter
